PATIENT LIFTS AND INSTALLATION

This is a SOURCES SOUGHT announcement only. It is neither a solicitation announcement nor a request for proposal or quote and does not obligate the Government to award a contract. Responses to this Sources Sought must be in writing. The purpose of this Sources Sought Announcement is for market research, to make appropriate acquisition decisions, and to gain knowledge of potential qualified businesses capable of providing the following: AMSCO 50-Series 3-Bay Sinks for Kansas City VA Medical Center *** See Statement of Requirements below for details *** If this is within your capability, please respond with the information below:  • Company Name • Address • Point of Contact • Phone, Fax, and Email • UEI number • GSA Contract (as applicable) • Capability Statement that clearly and convincingly identifies your ability to fulfill this requirement. • Brochures of products being offered, to include specifications. • Meet the Buy American statute FAR 52.225-1 or provide country of manufacturer • what Country is this supply manufactured in. (Must be in your reply) • Authorized service provider letter from OEM Interested firms are reminded that in accordance with FAR 4.203, prospective contractors shall complete electronic annual representations and certifications to be considered for award. In addition, FAR 4.203 states that prospective contractors shall be registered in the System for Award Management (www.SAM.gov) database. All Service-Disabled Veteran Owned Small Businesses (SDVOSB) and Veteran Owned Small Businesses (VOSB) shall be verified in SBA at Small Business Search . Point of Contact for this Sources Sought is: Jonathan.Lutmer@va.gov Department of Veterans Affairs Network Contracting Office 15 3450 S. 4th Street Trafficway Leavenworth, KS. 66048 Statement of Work Guldmann Ceiling Lifts for CLC Robert J. Dole VA Medical Center Background The Robert J. Dole VA Medical Center located in Wichita, KS is seeking to acquire and install Guldmann GH3+ (Brand Name Only) overhead lift systems, as outlined in the Scope of Work and Salient Characteristics sections. These lift systems will be installed in conjunction with a two-phase construction project in the Community Living Center (CLC), including an addition (Phase 1) and a renovation (Phase 2). All work must be conducted in accordance with Contract 36C25521C0012 and coordinated with the project’s Construction General Contractor. If changes occur with the construction contract, this contract may subsequently change. Scope of Work – All Items mentioned herein are Brand Name Only All patient rooms with attached bathrooms and bathing rooms will be equipped with overhead ceiling tracks and motorized hoists, as outlined in Table 1. Due to the structure of the building, some locations require wall-mounted supports, instead of ceiling-mounted, also detailed in Table 1. Table 1: Lift types, quantities, and locations   Ceiling-mounted Rooms Wall-mounted Rooms Phase 1: Addition (A drawings)   General patient 16 121/121A, 122/122A, 134/134A, 135/135A, 136/136A, 137/137A, 138/138A, 139/139A, 140/140A, 141/141A, 142/142A, 143/143A, 145/145A, 146/146A, 151/151A, 152/152A 0   Bariatric 1 119/119A 0   Bathing room 1 117/117A 0   Phase 2: Renovation (B drawings)   General patient 5 153/153A, 155/155A, 160/160A, 162/162A, 164/164A 8 156/156A, 157/157A, 158/158A, 159/159A, 161/161A, 163/163A, 173/173A, 175/175A Bariatric 0 0   Bathing room 0 1 176/176A   *All rooms include attached bathrooms When rooms or bathing rooms have attached bathrooms, the room and bathroom should be one system (meaning the tracks in the room and bathroom should connect and only utilize one lift motor) whenever possible. The facility will reuse 30 770 lb GH3 Guldmann lift motors. All other lift motors will need to be purchased. Salient Characteristics Patient lifts in general patient rooms with bathrooms must support 770 lbs (weight capacity does not include the 1.5 weight-testing safety factor). Patient lifts in bariatric patient rooms and bathrooms and bathing rooms must support 825 lbs (weight capacity does not include the 1.5 weight-testing safety factor). Ceiling lifts must not be combined with rails or hardware from different manufacturers and must be consistent with the products already in the facility. Lift motors must- support 1.5 times the capacity (ex. 770 lb x 1.5 = 1155 lb) be capable of picking patients up off the floor. include a trolley assembly with load cell, charger, and cover. Be capable of using a hanger bar and able to use the full range of basic slings. not beep or flash during normal operation. include a hand control for each lift. Each hand control must- include a display to fully operate all functions from the digital control pad. include the following operating modes: control, weighing, and data collection. be capable of attaching to the lift motor or carry bar via clip o