Assorted Mass Flow Controllers

Please provide a quotation for the items listed below. The quote should include the applicable lead time. Please also extend any available discounts to offer Brookhaven Science Associates (BSA) your best possible pricing . If applicable, please include the ECCN and HTS code for each item. Important Pricing/Shipping Requirements: If items are under 150lbs, they may ship internationally on our FedEx Account; please advise on the weight of the items If the above is not possible, pricing must be all-inclusive , incorporating freight, tariffs, packing, handling, and any other associated fees for delivery to Brookhaven National Laboratory (BNL). The resulting purchase order will not include separate line items for freight or additional charges; all costs must be included in the item price. If items are over 150lbs AND all-inclusive pricing is not available for foreign products, BNL must be listed as the Importer of Record . In such cases, Incoterms shall be DAP , and BNL’s designated freight forwarder (to be provided) must be utilized. ~~ SEE ATTACHED DRAFT PO WITH QA CLAUSES ~~ Items to Be Quoted: Line 1  001/000 EL-FLOW Prestige FG-201CS Mass Flow Controller Model key : FG-201CS-AAD-11-V-DA-000 Product series : EL-FLOW Prestige Ingress protection : IP-40 Material : Stainless steel 316 Multi Fluid Multi Range : Enabled Control function : Flow control Fluid : H2 (Hydrogen) Flow range : 0.21814...20 sccm Accuracy : ±0.5% Rd plus ±0.1% FS (At calibration conditions) Calibration certificate : 3-point actual calibration (0%, 50%, 100%) Inlet pressure (P1) : 60 psi (g) Outlet pressure (P2) : 40 psi (g) Valve function : Normally Closed Orifice : 0.05 mm Temperature : 72 °F Seals : Viton 51415 Plunger : FFKM Shut-off valve type : Electric NC Shut-off valve seal : Viton 51415 Inlet connection : 1/8" OD compression Outlet connection : 1/8" OD compression Output signal : RS-232 0...100 % (0...5 Vdc) Setpoint : RS-232 0...100 % (0...5 Vdc) Control mode : Digital Instrument interface : RS-232 - Baudrate : 38400 - Parity : None Power supply : +15...24 Vdc Qty 1.00 UOM  EA Line 2 002/000 EL-FLOW Prestige FG-201CS Mass Flow Controller Model key : FG-201CS-AAD-11-V-DA-000 Product series : EL-FLOW Prestige Ingress protection : IP-40 Material : Stainless steel 316 Multi Fluid Multi Range : Enabled Control function : Flow control Active fluid : Fluid 1 Fluid : He (Helium) Flow range : 0.45643...50 sccm Accuracy : ±0.5% Rd plus ±0.1% FS (At calibration conditions) Calibration certificate : 3-point actual calibration (0%, 50%, 100%) Inlet pressure (P1) : 60 psi (g) Outlet pressure (P2) : 40 psi (g) Valve function : Normally Closed Orifice : 0.07 mm Temperature : 72 °F Seals : Viton 51415 Plunger : FFKM Shut-off valve type : Electric NC Shut-off valve seal : Viton 51415 Inlet connection : 1/8" OD compression Outlet connection : 1/8" OD compression Output signal : RS-232 0...100 % (0...5 Vdc) Setpoint : RS-232 0...100 % (0...5 Vdc) Control mode : Digital Instrument interface : RS-232 - Baudrate : 38400 - Parity : None Power supply : +15...24 Vdc QA-P-038: degreased for O2 use. Additional calculated curve for Fluid 2 Fluid : Mix: 5.0% CO (Carbon monoxide) + 95.0% He (Helium) (volume % at 0 °C and 1013.25 hPa) Flow range : 0.40887...50 sccm Inlet pressure (P1) : 60 psi (g) Outlet pressure (P2) : 40 psi (g) Temperature : 72 °F Calibration certificate : 3-point calibration (0%, 50%, 100%) Additional calculated curve for Fluid 3 Fluid : Mix: 5.0% CO (Carbon monoxide) + 95.0% Air (volume % at 0 °C and 1013.25 hPa) Flow range : 0.29404...48 sccm Inlet pressure (P1) : 60 psi (g) Outlet pressure (P2) : 40 psi (g) Temperature : 72 °F Calibration certificate : 3-point calibration (0%, 50%, 100%) Qty 1.00 UOM  EA Line 3 003/000 EL-FLOW Prestige FG-201CS Mass Flow Controller Model key : FG-201CS-AAD-11-V-DA-000 Product series : EL-FLOW Prestige Ingress protection : IP-40 Material : Stainless steel 316 Multi Fluid Multi Range : Enabled Control function : Flow control Active fluid : Fluid 1 Fluid : CO2 (Carbon dioxide) Flow range : 0.21648...20 sccm Accuracy : ±0.5% Rd plus ±0.1% FS (At calibration conditions) Calibration certificate : 3-point actual calibration (0%, 50%, 100%) Inlet pressure (P1) : 60 psi (g) Outlet pressure (P2) : 40 psi (g) Valve function : Normally Closed Orifice : 0.05 mm Temperature : 72 °F Seals : Viton 51415 Plunger : FFKM Shut-off valve type : Electric NC Shut-off valve seal : Viton 51415 Inlet connection : 1/8" OD compression Outlet connection : 1/8" OD compression Output signal : RS-232 0...100 % (0...5 Vdc) Setpoint : RS-232 0...100 % (0...5 Vdc) Control mode : Digital Instrument interface : RS-232 - Baudrate : 38400 - Parity : None Power supply : +15...24 Vdc QA-P-038: degreased for O2 use. Additional calculated curve for Fluid 2 Fluid : CH4 (Methane) Flow range : 0.23204...20 sccm Inlet pressure (P1)