Bruker Titan 800 XRF Analyzer

5/12/2026 Amendment 1 is being issued to add the model number of the required unit options. TITAN 800 Bruker TITAN 800 with 8 mm spot size Premium 4W Rhodium (Rh) thin window X-ray tube based 50kV handheld XRF analyzer. Wide Range X-Ray • Generator 5-50kV with 200μA max. current • Large area silicon drift detector and optimized high count rate DPP and Graphene Window for enhanced light element performance • Protected against detector puncture with the patented TITAN Detector Shield (TDS) • Capable of detecting elements from Magnesium (Mg) to Uranium (U) • Automated five (5) position primary beam Filter changer with four (4) pre-fitted filters optimized for Alloys, Restricted Materials, Plastic and Geology • Light weight, <1.5kg with batteries • Patented SharpBeam™ optical beam path for best performance at lowest power settings extending battery life and avoiding overheating as well as defined beam spot • IP54 rated industrial grade hard molded housing with no-slip rubberized grip • S1 TITAN OS embedded SW with multilingual support and easy to use interface • Measurement and testing modes include Pass/Fail / Grade ID / Limits / Chemistry mode Bluetooth™, USB and Wi-Fi connectivity (where allowed by local regulations) • 3 mm spot size available on demand • Includes two (2) high performance Li-Ion batteries with smart charger • USB stick for data storage and easy reporting • Bruker Instrument Toolbox software package for reporting, qualitative spectral analysis, live spectrum functionality, flexible grade table, user field editor and remote instrument control • Bruker Data Stream software package for seamless data transfer • 5 spare PROLENE™ protective windows • Extensive manuals and safety video • Waterproof and pressure equilibrated PELICAN™ transport case 730.0177 Alloy LE (2) – Alloy calibration package with light element capability. Includes Auto mode and user selectable type specific calibrations for stainless steels, tool steels, low alloy steels, nickel alloys, cobalt alloys, copper alloys, zinc alloys, light (Al, Mg and Ti) alloys and general calibration for all other alloy types. SmartGrade functionality for fastest alloy ID without user decision. Shaving and Turnings mode for small samples and stand off measurements. Includes alloy check sample (478478-000). HMP-DTS S1 Titan Desktop Stand – Includes desktop stand, AC adaptor and fits into 1550 Pelican Case. No external power required. 200.0061 S1 Titan PROLENE Windows. Total of 5 protective windows. 160.0514 Remote Trigger – Remote trigger cable 3 m (10 ft) length 160.0182 Sample Cups - Tube based package of preassembled Sample cups 32 mm diamater with vented cap PROLENE™ 4μm; pkg of 10 DLA Disposition Services Bruker TITAN 800 XRF ANALYZER – HANDHELD This is a combined synopsis/solicitation for commercial items/services prepared in accordance with FAR Part 12. The required equipment is per the attached specifications, including its delivery timeframes. The procurement is under NAICS 334516 with a size standard of 1000 employees. The requirement is full and open. Quotes are to be received no later than 1:00 p.m. Eastern Standard U.S. Time on the above specified date, via email only to the designated Contracting Officer. See Attachment for the Price Schedule and Specifications/Additional Terms.  All contractor performance shall be in a safe manner, and in compliance with all applicable Federal, state, and local laws and regulations, and all installation policies.  Any/all required documentation and service-related requirements including installation access are the responsibility of the contractor, with coordination as necessary with the site POC. Notes: The Government will not accept late quotes. The Government will not accept quotes that are partial or incomplete. Email quotes to matthew.wonch@dla.mil on or before the closing date of the solicitation. 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (SEP 2023) - All offerors shall submit detailed technical specifications on the Bruker TITAN 800 XRF ANALYZER being proposed for technical acceptability review. The detailed specification shall be complete to verify that all salient characteristics are met. All quotes shall state the delivery lead-time.   52.212-2 Evaluation—Commercial Products and Commercial Services (NOV 2021) applies to this procurement (with evaluation consisting of award to the responsible contractor on the basis of the lowest evaluated price technically acceptable).  52.212-4 Contract Terms and Conditions—Commercial Products and Commercial Services (NOV 2023) 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) 52.204-7 System for Award Management (NOV 2024) 52.204-10 Reporting Executive Compensation and First-Tier